Natural Stone Resurfacing, Cleaning and Sealing
Mr Steam is Twin Falls’s Natural Stone, Marble, Limestone, Travertine, Slate, Granite, Terrazzo Cleaning Specialist!
Just like ceramic tile, natural stone is one of the most abused and overlooked floor and wall surfaces in the home simply because of the care involved in cleaning it. An etch mark in a polished marble or travertine floor can be a constant reminder that grandmother wasn’t always right about the merits of cleaning with a solution of vinegar and water.
The good news is Mr. Steam can make short work of this task.
Whether you have natural stone in your kitchen, bathroom, or some other area of your home, those stubborn stains and etch marks don’t stand a chance. Your natural stone will look very much as it did the day it was installed.
At Mr. Steam we are dedicated to helping you keep your home healthy, clean, and always looking its best. The solution to difficult natural stone, cleaning & sealing is just a phone call away.
Trust Mr. Steam for all those difficult and unpopular projects. You really will be glad you did.
Natural Stone Cleaning Processes
All Natural Stone cleaning and restoration as well as sealing jobs must be preceded by a thorough pre-inspection. Here we determine a customized care plan to meet your specific needs for your specific floor.
Because your home is important to you it is important to us; we will take the necessary precautions to protect all areas surrounding your floors with 24” plastic sheets and blue tape.
Stone that is etched, scuffed and scratched can be restored only by the use of mechanical abrasives underneath a rotary machine. Diamond abrasives resurface/remove a slight amount of stone (just enough to get below the etch marks and scratches). All diamond grinding is performed with the use of water to contain dust. The surfacing procedures that follow will determine the desired surface sheen.
Stone is mechanically resurfaced using diamond abrasives and water to achieve a uniformly honed surface sheen. Filler within travertine stone that looks cloudy, splotchy or dirty becomes uniform with our finishing techniques. If desired, polished marble, granite, travertine or limestone can be mechanically honed to remove pre-existing surface polish.
Stone is mechanically finished to produce a high gloss shine. Very light etches, scuffs and scratches may be removed with the polishing process, but diamond grinding is needed if the stone surface has medium deep etches, scuffs and scratches.
Cleaning Processes vary from floor to floor, many variables include make-up, maintenance, soiling conditions, traffic, use, etc… When cleaning any stone floor we use the most scientifically advanced cleaning products and the floor is then machine or hand scrubbed and brushed. Finally the new SX-12 floor cleaning tool, connected to a truck-mounted hot water extraction system is used, achieving maximum soil removal and best overall cleaning results.
Sealing and Enhancers
We apply a clear impregnator to help protect the stone and make it easier to maintain. Depending on the stone type, an enhancer or high gloss protection can be applied.
General cleaners not specifically formulated for natural stone or tile are never recommended. These can breakdown the sealer, thereby removing its protective properties and making the stone and tile grout susceptible to stains. Worse yet, many cleaning products, including those that contain lemon, vinegar, bleach or ammonia can etch away the polish, discolor the surface, or even scratch your stone.
Many cleaners have what is called a chelating agent in them. This agent breaks down and dissolves minerals in hard water. Since all stone is made up of minerals, these types of cleaners will dissolve and cause streaks over prolonged use. Mr Steam offers the complete line of StoneTech Professional™ Products.